|
The Gateway AnyKey is a programmable PC keyboard that was sold with desktop computers from the Gateway 2000 company roughly from 1990 to 1995. It was manufactured in at least five known versions and incarnations by Tucson, Arizona-based Maxi Switch, now a subsidiary of LiteOn Technology Corporation. The AnyKey is no longer manufactured, with the latest dated model available marked 1996. Maxi Switch, Gateway, and LiteOn currently do not offer any product labeled as or comparable to the AnyKey. The AnyKey keyboard is easily distinguished from other generic keyboards by an extra double column of F keys on the left side, a unique eight directional arrow key pad as opposed to the traditional inverted T, and a quartet of extra keys directly above the numeric pad that control the programmable aspects of the keyboard. They are labeled “Program Macro”, “Suspend Macro”, “Repeat Rate”, and “Remap”, reading left to right. All versions of the AnyKey are white or very light gray with some keys (notably the programming keys, extra function keys, and arrows) in a darker gray. ==Features and construction== The AnyKey is a 124-key PC keyboard, comprising the usual complement of 101 keys as well as 23 additional keys. The keyboard includes 12 extra function keys, four programming keys, and four additional arrow keys for diagonal input, as well as one blank key in the center of the eight way arrow key area that normally acts as a second space bar but can be programmed. The AnyKey has a fourth indicator light labeled "Program," located to the right of the Num Lock, Caps Lock, and Scroll Lock lights. Revisions of its design that predate the advent of the “Windows” keyboard have an the asterisk ( *), backslash (\), or hash (#) in the windows key locations, depending on the intended locale. Since the design of the AnyKey predates the "multimedia PC," it lacks the additional multimedia keys (play, pause, volume) present on many modern keyboards. A unique feature of the AnyKey is its hardware programmability. The keyboard contains an internal controller as well as an EEPROM chip that can store user-defined macros. Any key on the keyboard can be programmed to contain a macro of arbitrary length or can be programmed to act like any other key on the keyboard (remapped). This is done on the hardware level inside the keyboard's controller itself. No driver software is required to use the AnyKey's programming functionality, as the keyboard's own controller dictates which keypress codes are sent to the attached computer. A utility for MS-DOS exists to quickly remap the entire keyboard to a predefined configuration or save its current configuration to a file, but it is not required to use or program the keyboard. The AnyKey's EEPROM memory will retain its data even if the keyboard is unplugged indefinitely, so settings and programming aren't lost if the computer is powered down, unplugged, or if the keyboard is unplugged or moved to a different computer. The keyboard can be programmed to call up and execute software programs in the computer, but must compensate for the time it takes the computer to execute the program via inserting a delay of 1–5 seconds before entering a subsequent series of commands. The controller board inside the Anykey contains six integrated circuit packages (“chips”) in addition to various signal regulation hardware including 15 diodes, 11 capacitors, and nine resistors of unknown specific function in addition to four green LED's for signalling purposes of (left to right)“NUM LOCK”, “CAPS LOCK”, “SCROLL LOCK”, and “PROGRAM”. The chips included are an Intel P8052AH microcontroller, an Atmel AT28C16 16 kilobit EEPROM chip, and four Fairchild Semiconductor Decoder/Demultiplexer chips of various descriptions. The AnyKey is available in AT and PS/2 style configurations, and can be used with either configuration via a simple adapter. As its design predates the implementation of the USB standard, no USB AnyKey keyboard was ever produced. However, a PS/2 to USB converter will allow the AnyKey to be used with modern USB systems. The AnyKey is constructed of a plastic chassis that is large compared to most modern keyboards (partially owing to the extra columns of keys on the left side) and also slightly thicker than most keyboard casings of the present era. It is rounded on all corners and edges, with an overall rectangular shape. As with many keyboards, there are two plastic feet that can be flipped down from the upper corners to tilt the keyboard into a suitable typing position. There is also a long central plastic foot, on some versions, that can be flipped down to tilt the keyboard to a less severe angle than the two outside feet. The AnyKey uses rubber dome type keyswitches, with all the switches and contact points on a single sheet. The keyswitch layer contacts a single flexible membrane that detects all keypresses and directs them to the controller board via a pair of flexible edge connectors. While the AnyKey is branded as a Gateway product, the membrane layer clearly bears the inscription “Maxi Switch Inc,” revealing the true maker of the hardware. This membrane is backed by a metal plate approximately a sixteenth of an inch thick which serves to hold the membrane rigid and in place as well as giving the keyboard considerable heft. Held in place on top of the rubber dome layer is a plastic block that holds the key pillars which in turn hold the keycaps themselves. The key pillars are individually replaceable but cannot be removed without dismantling the keyboard to separate the rubber dome layer from the plastic support layer and the removal of the latter from the assembly. The key caps are held onto the pillars via friction with cross shaped pegs. The key caps are easily removed for cleaning or rearrangement, as all keys on the keyboard use the same attachment method and, with the exception of the Space Bar, Enter, Shift, Tab, Control, Alt, and Caps Lock keys, they are all the same size. In this manner, keys that have been remapped (like the commonly remapped arrow keys) can also be physically moved to the correct location on the board. Physical relocation of keytops should be done with caution as the slope of the keytops is raked into three pairs of rows, e.g. if the Z key is swapped with the F1 key, both keys will have different rake to those surrounding them. The AnyKey also has a user programmable repeat rate (the rate at which a key will repeat its function on the computer if it is held down) that is handled by the controller inside the board and therefore overrides the BIOS or operating system controlled repeat rate on the attached computer. The repeat rate is set by pressing the “Repeat Rate” key and then one of the top row F keys, with F1 being the slowest rate and F8 being the fastest - then press "Repeat Rate" again. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Gateway AnyKey」の詳細全文を読む スポンサード リンク
|